The vibrator has been widely used in petroleum,coal field and other seismic exploration,and the corresponding technical means are relatively mature;nevertheless,there is no reference basis for the parameter selection of middle and shallow seismic exploration with vibrator.In order to study how to obtain high quality data in middle and shallow seismic exploration,the authors carried out a series of "vibrator excitation,high frequency geophone reception" experiments in Xiong'an.Based on a large number of experimental data and using qualitative analysis of original single shot and quantitative analysis of frequency spectrum,this paper systematically discusses the influence of the selection of parameters such as vibration number of vibrator,sweep length,starting frequency,ending frequency,drive level,slope length and natural frequency of geophone on data quality.This paper clarifies the key points and basis of parameter selection,puts forward the concept of high cutoff frequency,and summarizes the strategy of parameter selection for middle and shallow seismic exploration,which provides some reference for the use of vibrator in middle and shallow seismic exploration.
谢兴隆, 马雪梅, 龙慧, 李秋辰, 郭淑君, 程正璞. 基于可控震源的中浅部地震勘探参数选择[J]. 物探与化探, 2021, 45(4): 1004-1013.
XIE Xing-Long, MA Xue-Mei, LONG Hui, LI Qiu-Chen, GUO Shu-Jun, CHENG Zheng-Pu. The parameter selection of middle and shallow seismic exploration based on vibrator. Geophysical and Geochemical Exploration, 2021, 45(4): 1004-1013.
Ling Y, Gao J, Sun D S, et al. Analysis of vibroseis in seismic exploration and its application[J]. Geophysical Prospecting for Petroleum, 2008,47(5):425-438.
Zhou R Y, Wei T, Zhang X F, et al. High-efficient alternative sweeping technique of vibroseis and application[J]. Oil Geophysical Prospecting, 2008,43(s2):15-18.
Liu X G, Liu Z G, Zhang J C, et al. Application of low-frequency vibrator in complex exploration area in Sudan[J]. Equipment for Geophysical Prospecting, 2019,29(2):71-75.
Li G L, Tian Y K, Yi W H, et al. Low-frequency vibroseis with high density wide line seismic acquisition technology research and application in Tibet Plateau:A case study of low-frequency vibroseis[J]. Progress in Geophysics, 2019,34(1):113-118.
Chen P, Yu C Q, Han J G, et al. Low-frequency vibroseis experimental study of 2D seismic exploration for Hala lake's permafrost region[J]. Progress in Geophysics, 2018,33(2):562-570.
[8]
Gibson J, Lin F, Egreteau A, et al. The case for longer sweeps in vibrator acquisition[J]. The Leading Edge, 2010,29(6):648-652.
[9]
Jean-Jacques , Postel , Julien , et al. V1:Implementation and application of single-vibrator acquisition[J]. The Leading Edge, 2008,27(5):604-608.
Qu Y M, Li Z C, Han W G, et al. The elimination technology for special interference in vibroseis efficient acquisition data[J]. Geophysical Prospecting for Petroleum, 2016,55(3):395-407.
Sun H C. Experimental study of vibroseis seismic acquisition technology on coal exploration in H prospecting area[J]. Geophysical and Geochemical Exploration, 2020,44(1):42-49.
[16]
Tsaig Y, Donoho D L. Extensions of compressed sensing[J]. Signal Processing, 2006,86(3):549-571.
Liang Y J, Li G L. The geophone property and preferences in land high-resolution seismic survey[J]. Geophysical Prospecting for Petroleum, 2005,44(6):640-644.
Zou Z H, Zhang Y M, Bian A F, et al. Low-frequency evaluation and recovery of conventional geophone data and applications in seismic imaging[J]. Oil Geophysical Prospecting, 2016,51(5):841-849.
[22]
Ziolkowski A, Hanssen P, Gatliff R, et al. Use of low frequencies for sub-basalt imaging[J]. Geophysical Prospecting, 2010,51(3):169-182.
Wang E H, Zhao B L, Wang X S, et al. Application and outlook of vibroseis acquisition techniques with high efficiency of CNPC[J]. China Petroleum Exploration, 2013,18(5):24-34.
Zhang L Y, Li A, Pei J Y, et al. Low frequency vibrator "Two-wide One-high" seismic processing technique research[J]. Progress in Geophysics, 2018,33(4):1629-1636.