1. School of Earth Sciences,Northeast Petroleum University (Daqing),Daqing 163318,China 2. Research Institute of Exploration and Development of Daqing Oilfield Company Limited,Daqing 163712,China 3. Institute of Geology and Geophysics,Chinese Academy of Sciences,Beijing 100029,China 4. Key Laboratory of Earth and Planetary Physics,Chinese Academy of Sciences,Beijing 100029,China;
The first arrival of seismic data is a key step of data preprocessing in seismic exploration.In the development of unconventional oil and gas reservoirs,surface microseismic monitoring technology is widely used.The focus of the work is to obtain the source location information generated by hydraulic fracturing,that is,the location of the microseismic source.For the microseismic source location, the initial picking of microseismic events is a key step,and the accuracy of the picking results directly affects the positioning accuracy of the microseismic events and the interpretation of the final results.However,in the actual seismic data,the signal-to-noise ratio of microseismic data is generally low,and it is difficult to obtain more accurate first arrival results.At present,the picking up of the first arrival wave of the microseismic is mainly divided into two methods:manual picking and computer automatic picking.The manual picking has the characteristics of high accuracy,but the workload is large,time-consuming and laborious.Aimed at picking accuracy of the first-arrival wave of seismic data and the anti-noise performance of the method,this paper makes improvement on the basis of the statistical energy ratio method of transforming time window,and sets the threshold value R while applying statistical law to obtain the superiority of high credibility.Combined with the value of picking range constraint Z and a variety of picking strategies,the first-arrival wave pick-up of the seismic record is finally achieved.The method was used to pick up the 3D seismic data of a work area in Songliao Basin and the hydraulic fracturing ground microseismic monitoring data of a horizontal well in Songliao Basin.The picking effect was obtained and the practicability of the method was verified.In summary,the method has achieved good pickup results in both the theoretical data of different signal-to-noise ratios and the application of actual data,and has strong anti-noise performance.
时伟, 林春华, 王维红, 高云路. 双约束变换时窗统计能量比地震波初至拾取方法[J]. 物探与化探, 2019, 43(5): 1064-1073.
Wei SHI, Chun-Hua LIN, Wei-Hong WANG, Yun-Lu GAO. A first arrival pickup method of micro-seismic event based on statistic energy ratio using varied time window with double constraints. Geophysical and Geochemical Exploration, 2019, 43(5): 1064-1073.
Qin X, Song W Q . Automatic first arrival pickup method of microseismic event based on energy ratio and mutual information[J]. Geophysical and Geochemical Exploration, 2016,40(2):374-379.
[5]
贾瑞生, 谭云亮, 孙红梅 , 等. 低信噪比微地震 P 波震相初至自动拾取方法[J]. 煤炭学报, 2015,40(8):1845-1852.
[5]
Jia R S, Tan Y L, Sun H M , et al. Method of automatic detection on micro-seismic P-arrival time under low signal to noise ratio[J]. Journal of China Coal Society, 2015,40(8):1845-1852.
Zhang H L, Zhu G M, Wang Y H . Automatic microseismic event de-tection and picking method[J]. Geophysical and Geochemical Exploration, 2013,37(2):269-273.
[7]
McEvilly T V, Majer E L . ASP:An automated seismic processor for microearthquake networks[J]. Bulletin of the Seismological Society of America, 1982,72(1):303-325.
[8]
Hegger R, Kantz H, Schreiber T . Practical implementation of non-linear time series methods:the TISEAN package[J]. CHAOS, 1999,9(2):413-435.
Tan Y Y, Yu J, Feng G , et al. Arrival picking of microseismic events using the SLPEA algorithm[J]. Chinese J.Geophys.(in Chinese), 2016,59(1):185-196.
Sun Y, Pan S, Liu M . Seismic Phase Identification Associated with the Automatic Pickup Technology and Its Application[J]. Earthquake Research in China, 2018,34(4):606-620.
[11]
St-Onge A . Akaike information criterion applied to detecting first arrival times on microseismic data [C]//2011 CSPG CSEG CWLS Convention, 2011: 1-5.
[12]
Zeiler C, Velasco A A . Seismogram picking error from analyst review (SPEAR):Single-analyst and institution analysis[J]. Bulletin of the Seismological Society of America, 2009,99(5):2759-2770.
Tian Y P, Zhao A H . Automatic identification of P-phase based on wavelet packet and Kurtosis-AIC method[J]. Acta Seismologica Sinica, 2016,38(1):71-85.
Feng Z H, Liu C, Feng W , et al. A Method of automatic first arrival extraction based on one-Dimensional slice of cross-fourth-order cumulants[J]. Journal of Jilin University:Earth Science Edition, 2011,41(2):559-564.
Chen X, Li X A, Liu W X , et al. Methodology and application of first break picking based on S-transform[J]. Coal Geology of China, 2009,21(11):59-63.
[16]
Stevenson P R . Microearthquakes at Flathead Lake,Montana:A study using automatic earthquake processing[J]. Bulletin of the Seismological Society of America, 1976,66(1):61-80.
[17]
Allen R . Automatic earthquake recognition and timing from single traces[J]. Bulletin of the Seismological Society of America, 1978,68:1521-1532.
[18]
Baer, Kradolfer . An automatic phase picker for local and teleseismic events[J]. Bulletin of the Seismological Society of America, 1987,77:1437-1445.
[19]
Earle P S, Shearer P M . Characterization of global seismograms using an automatic-picking algorithm[J]. Bulletin of the Seismological Society of America, 1994,84:366-376.
[20]
Young W A, Beiriger J, Harris M , et al. A comparison of select trigger algorithms for automated global seismic phase and event detection[J]. Bulletin of the Seismological Society of America, 1998,88:95-106.
[21]
Baranov S V . Application of the wavelet transform to automatic seismic signal detection[J]. Physics of the Solid Earth, 2007,43(2):177-188.
[22]
Pikoulis E M, Psarakis E Z . A ratio test for the accurate automatic P-wave onset detection[J]. ICSP Proceedings, 2010: 2621-2624.
[23]
Ross Z E, Ben-Zion Y . An earthquake detection algorithm with pseudo-probabilities of multiple indicators[J]. Geophysical Journal International, 2014,197:458-463.
[24]
Vaezi Y, Baan M V D .Comparison of the STA/LTA and power spectral density methods for microseismic event detection[J]. Geophysical Journal International, 2015,203(3):1896-1908.
[25]
Akram J, Peter D, Eaton D . A k-mean characteristic function for optimizing STA/LTA based detection of microseismic events[J]. Geophysics, 2019,84(4):143-153.
Ye G X, Jiang F X, Yang S H . Possibility of automatically picking first arrival of microseismic waveby energy eigenvalue method[J]. Chinese J Geophys.(in Chinese), 2008,51(5):1574-1581.
Zhang W, Wang H, Li H C , et al. Theapplication of statist energy ratio of transform timewindowsto thepickup of seism ic first arrival wave[J]. Geophysical and Geochemical Exploration, 2009,33(2):178-180.
Lv S C, Song W Q, Liu Y M , et al. The polarization constrained LTA/STA method for automatic detectuon of microseosmic[J]. Geophysical and Geochemical Exploration, 2013,37(3):488-493.
Chen J H, Cao Y S, Sun C L , et al. The algorithm for automatic first-breaks picking on seismic traces based on dichotomy[J]. Progress in Geophysics, 2015,30(2):688-694.
Liu X M, Zhao J J, Peng P A , et al. Research on Automatic Recognizing of the Effective Microseismic Signals[J]. Goid Science and Technobgy, 2017,25(3):84-91.