Q modification under the situation of strong attenuation
YANG Xiao-Hui1, LU Hong-Mei2, WANG Rong-Juan2, MA Yuan-Yuan3, YUAN Dian3, CUI Zhen3, HE Yuan3
1. Geophysical Research Institute, SINOPEC, Nanjing 210014, China;
2. Exploration & Production Research Institute, SINOPEC, Beijing 100083, China;
3. School of Geophysics and Information Engineering, China University of Petroleum, Beijing 102249
Quality factor (Q) is a key parameter for geophysical exploration in that it indicates the magnitude of sediment attenuation.When attenuation is large,quality factor computed by conventional methods such as spectral ratio method is smaller than 2π,which is the low limit of Q calculated by defining expression.Conversion formula for the two quality factors is introduced by investigating the differences between them.Model tests indicate that,when quality factor is lower than 30,relative error between quality factors calculated by two methods is larger than 10% so that they should be distinguished one from another.Based on this study,the authors put forward some advises.First,during Q-V fitting process,it is prefer to use the quality factors calculated by defining expression.Second,conventional method is preferred in gaining quality factors in reverse Q compensation process.Third,when the comparison of quality factors is needed in an oil field,quality factors should be converted to the same class before the comparison.
杨小慧, 陆红梅, 王荣娟, 马媛媛, 袁殿, 崔震, 何元. 强衰减条件下Q值修正[J]. 物探与化探, 2015, 39(5): 1069-1073.
YANG Xiao-Hui, LU Hong-Mei, WANG Rong-Juan, MA Yuan-Yuan, YUAN Dian, CUI Zhen, HE Yuan. Q modification under the situation of strong attenuation. Geophysical and Geochemical Exploration, 2015, 39(5): 1069-1073.
[1] 马昭军,刘洋.地震波衰减反演研究综述[J].地球物理学进展,2005,20(4):1074-1082.[2] 涂远艮,王达远,李华科.川西坳陷地震波衰减定量估算及分析[J].物探与化探,2013,37(4):596-602,632.[3] Hale D.An inverse-Q filter[J].Stanford Exploration Project Report,1981,26:231-243.[4] Hale D.Q-adaptive deconvolution[J].Stanford Exploration Project Report,1982,30:133-158.[5] Hargreaves N D,Calvert A J.Inverse Q filtering by Fourier transform[J].Geophysics,1991,56(4):519-52.[6] 郭见乐.基于粘滞性声波方程的吸收补偿方法[J].物探与化探,2014,38(3):577-581.[7] 郭恺,娄婷婷.双复杂介质条件下的反Q滤波偏移延拓算子研究[J].物探与化探,2014,38(3):571-576.[8] 王珊,于承业,王云专,等.稳定有效的反Q滤波方法[J].物探与化探,2009,33(6):696-699.[9] Wang Y H.A stable and efficient approach to inverse Q filtering[J].Geophysics,2002,67:657-663.[10] Kjartansson E.Constant Q-wave propagation and attenuation[J].J Geophys Res,1979,84:4737-4748.[11] 王慧茹.谱模拟频谱比法反演品质因子稳定性分析[J].物探与化探,2009,33(1):85-87.[12] 付勋勋,张君学,陈阵,等.基于S变换求取地层的品质因子Q[J].物探与化探,2013,37(1):113-116.[13] Quan Y L,Harris J M.Seismic attenuation tomography using the frequency shift method[J].Geophysics,1997,62(3):895-905.[14] 赵宁,曹思远,王宗俊,等.频域统计性属性组合提取品质因子Q[J].石油地球物理勘探,2013,48(4):545-552.[15] 罗春喜,程增庆,王永哲,等.地震激发井深与品质因数的关系[J].中国煤田地质,2007,19(2):56-58.[16] 王国庆.近地表衰减的模型实验研究[D].北京:中国石油大学(北京),2014:17-19.[17] 钱绍瑚,高建华,谷永兴,等.地层吸收衰减模型的制作及补偿方法的研究[J].石油地球物理勘探,1998,33(s1):18-24.[18] 付德华.大庆探区近地表地震信号吸收衰减规律研究[D].大庆:大庆石油学院,2008:46-59.