THE APPLICATION OF SURFACE WAVE TEST TECHNIQUE TO ESTIMATING THE BEARING CAPACITY OF PILE
WU Wei1, ZHANG Xian-min2, YANG Jin1, CAO Jin-feng3
1. Faculty of Geophysical Exploration, China University of Geosciences, Beijing 100083, China;
2. The Faculty of Civil Engineering, Hebei University of Technology, Tianjin 300130, China;
3. China University of mining and Technology, Beijing 100083, China
The method for determining the load bearing capacity of pile is summarized and the basic principle of the transient surface wave test technique is described in this paper. The application of this technique to estimating the bearing capacity of pile, in particular, is presented with a practical example. The standard penetration test blow count (N63.5) related to the shear wave velocity could be used to estimate the bearing capacity of pile. The correlation model of Vs with qsik and qpk was constructed through N63.5. The transient surface wave could be used to test the shear wave velocity of soil around the pile and estimate the bearing capacity of pile.
武炜, 张献民, 杨进, 曹金凤. 瞬态面波预测单桩承载力模型研究[J]. 物探与化探, 2004, 28(1): 88-91.
WU Wei, ZHANG Xian-min, YANG Jin, CAO Jin-feng. THE APPLICATION OF SURFACE WAVE TEST TECHNIQUE TO ESTIMATING THE BEARING CAPACITY OF PILE. Geophysical and Geochemical Exploration, 2004, 28(1): 88-91.