1. Fujian Xianyou Pumped Storage Power Co., Ltd., Putian 351267, China 2. College of Environment and Resources, Fuzhou University, Fuzhou 350116, China 3. Fujian Provincial Universities Engineering Research Center of Geological Engineering, Fuzhou 350116, China 4. Fuzhou Branch of East China Engineering Co., Ltd., Fuzhou 350000, China
In the construction of large-scale hydropower stations, a large amount of waste slag is produced and is often deposited in the nearby site, thus forming a large scale waste accumulation body. Under the condition that the thickness and trend of the slag accumulation body are not ascertained, the excessive heap load will easily cause the collapse accident, so it is very important to investigate the distribution of the slag accumulation body. In this paper, the high density resistivity method was used as the main method, and the high density resistivity method was used to verify the abnormal area and key position of the electrical method. At the same time, drilling holes were arranged at the site for comparative analysis. The results show that the high density electrical processing results are in good agreement with the results of transient Rayleigh surface wave method and borehole data. Through this investigation, the authors basically detected the distribution of abandoned slag deposits. High density electrical method and transient Rayleigh surface wave method are effective methods for investigating slag deposits.
许艺煌, 黄真萍, 程志伟, 陈少博, 陈振明. 高密度电阻率法在弃渣堆积体分布调查中的应用[J]. 物探与化探, 2020, 44(2): 435-440.
Yi-Huang XU, Zhen-Ping HUANG, Zhi-Wei CHENG, Shao-Bo CHEN, Zhan-Ming CHEN. The application of high density electrical resistivity method to the investigation of the distribution of slag accumulation in hydropower station. Geophysical and Geochemical Exploration, 2020, 44(2): 435-440.
Liu J W, Shi D M, Ma X G , et al. Stability characteristics analysis on sideslops of excavation waste dump[J]. Journal of Soil and Water Conservation, 2007,21(5):192-195.
Zhao Q, Zheng C X . Analysis on classification and engineering protection measures of ditch type slag dump[J]. Soil and Water Conservation in China, 2010(4):38-40.
Liu H, Zhang J M, Shao R , et al. Sensitivity analysis of influencing factors of discarded soil field landslide[J]. Safety and Environmental Engineering, 2012,19(6):55-58.
[4]
高才坤 . 堆积体的综合物探方法研究与应用[D]. 长沙:中南大学, 2009.
[4]
Gao C K . The research and application of intergrated geophysical methods on accumulation body[D]. Changsha: Central South University, 2009.
Zheng B, Li L D . The exploring effect comparison of different settings in resistivity tomography[J]. Chinese Journal of Engineering Geophysics, 2015,12(1):33-39.
Huang Z P, Hu Y, Zhu P C , et al. Analysis of resolution fluence factors of high-density electric method and its application[J]. Journal of Engineering Geology, 2014,22(5):1015-1021.
Zhou Z J . The application of multi-electrode electric method in dividing concealed lithologic interface[J]. Chinese Journal of Engineering Geophysics, 2014,11(5):693-696.
He Q L, Li X L, Wang Z Y . The application of high density electrical method to the exploration management of landslide geological disasters[J]. Chinese Journal of Engineering Geophysics, 2016,13(1):99-104.
Huang Z P, Wu W D, Zhang Y , et al. Numerical simulation and analysis of three dimensionalhigh dependency method with highresolution[J]. Journal of Engineering Geology, 2015,23(4):209-214.
Li W L, Huang Z P, Wang F X , et al. The comparison between transient surface wave and micro-seismic wave exploration technology[J]. Chinese Journal of Engineering Geophysics, 2015,12(1):96-100.
Tang S G, Chen Y, Liang Z W , et al. An integrated application of transmission surface wave and seismic reconstruction methods to tunnel expansion[J]. Geophysical and Geochemical Exploration, 2004,28(6):557-560.