The H exploration area is located in the northeast of the Tulu-Tuomatan basin.Its geomorphology is desert and gobi.The climate in the area is dry,the plants are poorly developed,and the ecological conditions are very fragile.The surface is dominated by gravel and sub-sand layers,its thickness is large and the latent water level is deep.The choice of reasonable acquisition technology and parameters is the premise of seismic work and the key to ensuring seismic exploration results.Firstly,the feasibility of using vibroseis in this area was analyzed according to the seismic and geological conditions of the exploration area.Then,the selection of the vibrating parameters of the vibrator was tested,and the excitation parameters such as vibration number,scanning length,scanning frequency,and source output were determined.Referring to the experience of seismic exploration in adjacent areas,the authors chose the linear combination of multiple geophones and the observation system with high coverage times.The vibroseis technology was adopted,the selected acquisition parameters were finely constructed,and the better seismic effect was obtained,which provides valuable reference for the future seismic exploration of coal fields in similar areas.
孙海川. 可控震源地震采集技术在H探区煤炭勘查中的实验[J]. 物探与化探, 2020, 44(1): 42-49.
Hai-Chuan SUN. Experimental study of vibroseis seismic acquisition technology on coal exploration in H prospecting area. Geophysical and Geochemical Exploration, 2020, 44(1): 42-49.
Hao Y L, Xu D J, Liang M X , et al. Application of vibroseis in 3D seismic acquisition of coalfield in southern junggar basin[J]. Coal Technology, 2017,36(7):121-122.
Ding W, Hu L X, He J G , et al. The research onvibrator high efficient simulation technology and its application[J]. Geophysical Prospecting for Petroleum, 2014,53(3):338-343.
Zhang Y J, Tian X F, Leng G S . Application of vibrator in the region with complex seismic excitation conditions[J]. Coal Geology & Exploration, 2015,43(5):108-112.
Liu J X, Zhang B W, Wang X J , et al. The method for shallow seismic eploation in Qiangtang basin[J]. Geophysical and Geochemical Exploration, 2015,39(4):678-685.
Chai T, Han W G, Bi M B . A vibrator nonlinear sweeping signal design method and its application[J]. Geophysical and Geochemical Exploration, 2018,42(4):753-755.
Wang C H, Zhou H, Zhang M G , et al. Application of high efficiency vibroseis acquisition in Libya[J]. Oil Geophysical Prospecting, 2008,43(2):106-107.
[9]
郭彦民 . 利用可控震源进行高分辨率地震勘探[J]. 中国煤炭地质, 1996,8(3):72.
[9]
Guo Y M . Vibroseis is used for high resolution seismic exploration.[J]. Coal Geology of China, 1996,8(3):72.
An X Y, Li L W, Yu P F . Study and application of seismic and acquisition methods in igneous area of Erlian basin[J]. Geophysical Prospecting for Petroleum, 2004,43(2):171-175.
Wu H, Zhang B W, Wang K , et al. Comparative test of vibroseis excitation parameters for shallow seismic exploration in Hra Hu area[J]. Geophysical and Geochemical Exploration, 2018,42(5):1033-1035.
Xu J Y, Jiang C X, Zhang B W , et al. Existent problems and countermeasures in application of shallow seismic technology to eploring natural gas hydrate in land area[J]. Geophysicaland Geochemical Exploration, 2017,41(6):1127-1132.
People's Republic of China geological and mineral industry standards. DZ/T 0300—2017 specification for seismic exploration in coal field[S]. People's Republic of China Ministry of Land and Resources, 2017.