|
|
A vibrator nonlinear sweeping signal design method and its application |
Tong CHAI1, Wen-Gong HAN2, Ming-Bo BI3 |
1. East China Branch,Petroleum Engineering Geophysical Co. Ltd.,SINOPEC,Nanjing 210000,China 2. Sinopec Petroleum Engineering Geophysical Limited Corporation,Beijing 100029,China 3. Changqing Branch of BGP Geological Research Insitute,CNPC,Xi’an 710021,China |
|
|
Abstract Severe attenuation by earth absorption and low S/N ratio exists in western China's desert areas.In order to improve the seismic exploration quality of geological targets,the authors put forward a nonlinear sweeping signal design method based on reflection frequency characteristics of target strata to enhance reflection data signal-to-noise ratio of purpose layers.According to characteristics of reflection data frequency spectrum and exploration mission requirements of major purpose layers,the expected frequency spectrum characteristic curves are designed,which are used as distribution relationship between sweeping frequency and energy and applied to controlling the dwell time of sweeping frequency.Then,nonlinear time-frequency relationship is computed and nonlinear sweeping signals are obtained.This method highlights the anticipated dominant frequency energy of sweeping signals and optimizes the seismic wave frequency spectrum of vibrator outputs.Forward modeling and single shot seismic record tests have verified the correctness and validity of this method.Good results are obtained through application tests.
|
Received: 16 May 2017
Published: 03 August 2018
|
|
|
|
|
[1] |
赵殿栋 . 塔里木盆地大沙漠区地震采集技术的发展及展望——可控震源地震采集技术在MGT地区的试验及应用[J]. 石油物探, 2015,54(4):367-375.
|
[2] |
林君 . 电磁驱动可控震源地震勘探原理及应用[M]. 北京: 科学出版社,2004:50-51, 163-166.
|
[3] |
俞寿朋 . 高分辨率地震勘探[M]. 北京: 石油工业出版社, 1993: 25-55.
|
[4] |
马振元, 杜文凤, 卢勇旭 , 等. 基于最小平方滤波的面波压制方法[J]. 物探与化探, 2016,40(3):561-567.
|
[5] |
林君, 陈鹏程, 姜弢 , 等. 浅层地震勘探的可控震源信号设计[J]. 地球物理学进展, 2004,19(4):807-811.
|
[6] |
王忠仁, 陈祖斌, 张林行 , 等. 可控震源非线性扫描地震响应的数值模拟[J]. 地球物理学进展, 2006,21(3):756-761.
|
[7] |
刘玉海, 尹成, 潘树林 , 等. 基于非线性扫描技术的可控震源地震勘探分辨率提高方法[J]. 东北石油大学学报, 2013,37(2):55-61.
|
[8] |
姚知铭, 梁传坤, 李红桃 . 可控震源非线性扫描在高分辨率地震勘探中的应用[J]. 石油地球物理勘探, 1998,33(s2):119-122.
|
[9] |
Cunningham A B . Some alternate vibrator signals[J]. Geophysics, 1979,4(12):1901-1921.
|
[10] |
张宏乐 . 一种改善相关子波特征的扫描信号[J]. 物探装备, 1999,9(3):17-20.
|
[11] |
张宏乐, 王梅生 . 一种改善相关子波特性的扫描信号[J]. 物探装备, 2006,16(s1):33-41.
|
[12] |
曹务祥, 李宪庆, 郭洪启 . 可控震源扫描信号的整形设计方法[J]. 石油物探, 2009,48(6):611-614.
|
[13] |
曹务祥 . 可控震源非线性扫描参数的定量选取[J]. 石油物探, 2004,43(3):242-244.
|
[14] |
曹务祥 . 非线性扫描因子的量化分析[J]. 石油物探, 2006,45(1):62-64.
|
[15] |
蓝加达 . 可控震源非线性扫描在高分辨率地震采集中的应用[J]. 石油物探, 2008,47(2):208-211.
|
[16] |
王华忠, 胡江涛 . 面向目标的可控震源混叠采集的反射子波设计[ C]//深圳:SPG/SEG国际地球物理会议论文集, 2011: 1105-1109.
|
[17] |
曲英铭, 黄建平, 李振春 , 等. 基于单元交错网格的变坐标系正演模拟方法在声—弹介质中的应用[J]. 石油物探, 2015,54(5):582-591.
|
[1] |
XIE Xing-Long, MA Xue-Mei, LONG Hui, LI Qiu-Chen, GUO Shu-Jun, CHENG Zheng-Pu. The parameter selection of middle and shallow seismic exploration based on vibrator[J]. Geophysical and Geochemical Exploration, 2021, 45(4): 1004-1013. |
[2] |
ZHAO Guang-Xue, RUAN Shuai, WU Su-Yuan. Researches on the selection of key parameters in AMT 2D nonlinear conjugate inversion for railway tunnel exploration[J]. Geophysical and Geochemical Exploration, 2021, 45(2): 480-489. |
|
|
|
|