用VC做探地雷达数据矢量图
张宝松, 刘庆成, 吴信民, 邱国清, 郝红蕾
东华理工学院, 江西 抚州 344000
THE GROUND PENETRATING RADAR DIGITAL CAD VECTORGRAPH BY MEANS OF VC
ZHANG Bao-song, LIU Qing-cheng, WU Xin-min, QIU Guo-qing, HAO Hong-lei
East China Institute of Technology, Fuzhou 344000, China
摘要 从探地雷达软件处理后的文件为出发点,经过读取显示,设置输出参数,导出成为DXF文件,从而实现CAD的矢量成图;提出一种用矢量图来代替位图方法,克服了探地雷达成果位图失真和不便引用等问题。
关键词 :
滩涂区 ,
浅层地震 ,
锤击震源 ,
叠前去噪 ,
浅层气
Abstract :This paper describes the processing result by GPR software. Through reading and displaying data, setting the output parameters and exporting to DXF files, the CAD vectorgraph can be realized. The paper puts up a method for replacing the bitmap by vectorgraph, thus overcoming the troubles such as the GPR bitmap distortion and the difficulty in quoting.
Key words :
Tidal-flat region
shallow seismic
hammer source
prestack denoising
shallow gas
收稿日期: 2006-03-01
出版日期: 2006-12-24
作者简介 : 张宝松(1981-),男,江苏泗阳人,东华理工学院探测系硕士研究生,主要从事于物探数据处理研究.
引用本文:
张宝松, 刘庆成, 吴信民, 邱国清, 郝红蕾. 用VC做探地雷达数据矢量图[J]. 物探与化探, 2006, 30(6): 548-550.
ZHANG Bao-song, LIU Qing-cheng, WU Xin-min, QIU Guo-qing, HAO Hong-lei. THE GROUND PENETRATING RADAR DIGITAL CAD VECTORGRAPH BY MEANS OF VC. Geophysical and Geochemical Exploration, 2006, 30(6): 548-550.
链接本文:
https://www.wutanyuhuatan.com/CN/
或
https://www.wutanyuhuatan.com/CN/Y2006/V30/I6/548
[1] Autodesk. DXF Reference,USA,1998 [J].
[2] 陈建春.矢量图形系统开发与编程[M].北京:电子工业出版社,2004.
[3] 李春雨.计算机图形学与实践[M].北京:北京航天航空大学出版社,2004.
Viewed
Full text
Abstract
Cited
Shared
Discussed