Please wait a minute...
E-mail Alert Rss
 
物探与化探  2019, Vol. 43 Issue (5): 1046-1053    DOI: 10.11720/wtyht.2019.0103
  方法研究·信息处理·仪器研制 本期目录 | 过刊浏览 | 高级检索 |
精密单点定位技术在青藏高原地区物探测量中的应用研究
杜辉1,2,3, 耿涛1,2,3, 段星星1,2,3, 冀显坤1,2,3, 白运1,2,3
1. 自然资源部 岩浆作用成矿与找矿重点实验室,陕西 西安 710054
2. 中国地质调查局 西安地质调查中心,陕西 西安 710054
3. 西北地质科技创新中心,陕西 西安 710054
The application of precise point positioning to local geophysical prospecting in the Tibetan Plateau
Hui DU1,2,3, Tao GENG1,2,3, Xing-Xing DUAN1,2,3, Xian-Kun JI1,2,3, Yun BAI1,2,3
1. Key laboratory for the Study of Focused Magmatism and Giant Ore Deposits,MLR,Xi’an 710054, China
2. Xi’an Center of China Geological Survey,Xi’an 710054, China;
3. Northwest Geological Science and Technology Innovation Center,Xi’an 710054, China;
全文: PDF(2070 KB)   HTML
输出: BibTeX | EndNote (RIS)      
摘要 

精密单点定位技术具有无需控制点、单台GPS接收机静态测量可获得高精度的坐标成果等优点,在青藏高原等困难地区的物探测量实践中具有广阔的应用前景。本文以利用精密单点定位技术处理青藏高原西部和东部的两个1:25万区域重力调查项目形成的控制点观测数据为基础,经过计算对比这些点的精密单点定位成果和传统测量平差方法所得的CGCS2000坐标成果之间的差值,分析误差来源,得出误差的主要来源是两者坐标值在历元和框架差异引起,进而通过历元和框架校正得出控制点的CGCS2000坐标,重新对比发现校正后的坐标值具有与传统测量平差坐标值相一致的精度,在此基础上提出了在实际物探测量中利用精密单点定位技术得到CGCS2000坐标成果的思路和注意事项,同时讨论了该方法的应用范围。

服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
杜辉
耿涛
段星星
冀显坤
白运
关键词 精密单点定位CGCS2000青藏高原物探测量    
Abstract

The precise point positioning method has such advantages as no control point and the fact that single receiver can obtain high precision coordinate results by static measurement. It has wide application in geophysical exploration in the Tibetan Plateau and other difficult areas. This paper is based on the dealing with observation data of control points formed by two 1:250,000 regional gravity survey projects in the west and east of the Tibetan Plateau using the precise point positioning method; by calculating and comparing the difference between the precision single point positioning result of these points and the CGCS2000 coordinate result obtained by traditional measurement adjustment method, the error source is analyzed. It is concluded that the main source of the error of two coordinates is caused in the calendar and frame difference, and then through calendar and frame correction the CGCS2000 coordinates of control point are obtained. It is found that the corrected coordinates have the same precision as the traditional adjustment coordinate. On such a basis, the authors put forward an idea of using precise point positioning method to obtain CGCS2000 coordinates and pointed out the items deserving attention in using this method, and the application range of this method.

Key wordsPPP    CGCS2000    Tibetan plateau    geophysical prospecting
收稿日期: 2019-03-01      出版日期: 2019-10-25
:  P631  
基金资助:国家重点研发计划“典型覆盖区航空地球物理技术示范处理解释软件平台开发”所属课题“北秦岭华阳川地区隐伏铀矿空—地—井协同勘查技术示范研究”项目(2017YFC0602205)
作者简介: 杜辉(1987-),男,工程师,学士,从事物探测量工作。Email: 296772098@qq.com
引用本文:   
杜辉, 耿涛, 段星星, 冀显坤, 白运. 精密单点定位技术在青藏高原地区物探测量中的应用研究[J]. 物探与化探, 2019, 43(5): 1046-1053.
Hui DU, Tao GENG, Xing-Xing DUAN, Xian-Kun JI, Yun BAI. The application of precise point positioning to local geophysical prospecting in the Tibetan Plateau. Geophysical and Geochemical Exploration, 2019, 43(5): 1046-1053.
链接本文:  
https://www.wutanyuhuatan.com/CN/10.11720/wtyht.2019.0103      或      https://www.wutanyuhuatan.com/CN/Y2019/V43/I5/1046
Fig.1  青海油墩子项目GPS控制网示意
Fig.2  坐标值收敛与观测时长的关系
A01 A02 A03 A04 G01 G02 G03 G04 G05 G06 G07 G08 G09 G10 G11 G12 G13
N 15 4 3 3 3 14 10 4 11 6 4 3 5 12 3 11 3
Table 1  油墩子项目各控制站参与计算的数据个数
Fig.3  实例-PPP计算坐标值内符合精度统计
Fig.4  实例-PPP计算坐标值外符合精度统计
Fig.5  青海门源项目GPS控制网示意
M01 M02 M03 M04 N01 N02 N03 N04 N05 N06 N07 N08 N09 N10 N11
N 4 4 4 11 3 7 15 12 7 3 3 8 3 3 3
Table 2  门源项目各控制站参与计算的数据个数
Fig.6  实例二PPP计算坐标值内符合精度统计
Fig.7  实例二PPP计算坐标值外符合精度统计
Fig.8  外符合坐标差值分布
Vx/(mm·a-1) Vy/(mm·a-1) Vz/(mm·a-1)
实例一 -32.6 -5.8 4.7
实例二 -34.1 -3.6 -5.7
Table 3  历元校正时采用的平均速度值
Tx/mm Ty/mm Tz/mm D/ppb Rx/mas Ry/mas Rz/mas Eopch
4.8 2.6 -33.2 2.92 0 0 0.06 2000.0
Table 4  ITRF2008至ITRF97的转换参数
Fig.9  校正后的外符合精度
[1] Zumberge J F, Heflin M B, Jefferson D C , et al. Precise point positioning for the efficient and robust analysis of GPS data from large networks[J]. Journal of Geophysical Research, 1997,102(B3):5005-5017.
[2] Kouba J, Heroux P . GPS precise point positioning using IGS orbit products[J]. GPS Solution, 2001,5(1):12-28.
[3] 刘经南, 叶世榕 . GPS非差相位精密单点定位技术探讨[J]. 武汉大学学报:信息科学版, 2002,27(3):234-240.
[3] Liu J N, Ye S R . GPS Priecise point positioning using undifferenced phase observation[J]. Geomatics and Information Science of Wuhan University, 2002,27(3):234-240.
[4] 吴江飞, 黄珹 . GPS精密单点定位模型及其应用分析[J]. 大地测量与地球动力学, 2008,28(1):96-100.
[4] Wu J F, Huang C . GPS precise point positioning models and their utility analysis[J]. Journal of Geodesy and Geodynamics, 2008,28(1):96-100.
[5] 张金宝, 王少闽 . GPS精密单点定位程序设计及实现[J]. 城市勘测, 2009,( 5):61-64.
[5] Zhang J B, Wang S M . Programmer of GPS precise point positioning[J]. Urban Geotechnical Investigation Surveying, 2009, ( 5):61-64.
[6] 阮仁桂, 郝金明, 吕志伟 , 等. GPS双频精密单点定位软件及其精度分析[J]. 测绘科学技术学报, 2009,26(4):276-280.
[6] Ruan R G, Hao J M, Lyu Z W , et al. GPS dual-frequency precise point positioning software and accuracy evaluation[J]. Journal of Geomatics Science and Technology, 2009,26(4):276-280.
[7] 张小红, 李星星, 郭斐 , 等. GPS单频精密单点定位软件实现与精度分析[J]. 武汉大学学报:信息科学版, 2008,33(8):783-787.
[7] Zhang X H, Li X X, Guo F , et al. Realization and precision analysis of single-frequency precise point positioning software[J]. Geomatics and Information Science of Wuhan University, 2008,33(8):783-787.
[8] 鲁洋为, 王振杰 . Bernese 5.0软件下的精密单点定位精度分析[J]. 测绘通报, 2016,( 2):22-25.
[8] Lu Y W, Wang Z J . Accuracy analysis of PPP based on GPS software bernese 5.0[J]. Bulletin of Surveying and Mapping, 2016, ( 2):22-25.
[9] 左廷英, 黄远成, 袁本银 . GPS精密单点定位外符合精度测试[J]. 矿山测量, 2008,( 5):8-11.
[9] Zuo T Y, Huang Y C, Yuan B Y . GPS precise point positioning outer coincidence accuracy test[J]. Mine Surveying, 2008, ( 5):8-11.
[10] 张光茹, 秘金钟 . 不同数据处理策略对PPP收敛精度的影响[J]. 测绘科学, 2018,43(3):77-81.
[10] Zhang G R, Mi J Z . Impact analysis of different data processing strategies for PPP convergence accuracy[J]. Science of Surveying and Mapping, 2018,43(3):77-81.
[11] 王涛涛, 洪伟 . 不同时长GNSS观测数据RTKLib精密单点精度定位研究[J]. 地理信息世界, 2018,25(5):114-117.
[11] Wang T T, Hong W . Research on the precision of RTKLib precise point positioning with different duration GNSS data[J]. Geomatics World, 2018,25(5):114-117.
[12] 耿涛, 赵齐乐, 刘经南 , 等. 基于PANDA软件的实时精密单点定位研究[J]. 武汉大学学报:信息科学版, 2007,32(4):312-315.
[12] Geng T, Zhao Q L, Liu J N , et al. Real-time precise point positioning based on PANDA sofeware[J]. Geomatics and Information Science of Wuhan University, 2007,32(4):312-315.
[13] 韩菲, 张春燕 . Bernese 5.0用于精密单点定位的数据处理及精度分析[J]. 测绘地理信息, 2015,40(6):28-31.
[13] Han F, Zhang C Y . Data processing and accuracy analysis in precise point positioning based on bernese 5.0[J]. Journal of Geomatics, 2015,40(6):28-31.
[14] 谭争光, 郭金运, 宗干 , 等. PANDA和Bernese软件的PPP比较分析[J]. 全球定位系统, 2013,38(5):60-64.
[14] Tan Z G, Guo J Y, Zong G , et al. Comparison of PPP between PANDA and bernese[J]. GNSS World of China, 2013,38(5):60-64.
[15] 李凯锋, 欧阳永忠, 陆秀平 , 等. 基于PPP技术的海岛礁平面控制测量应用实践[J]. 武汉大学学报:信息科学版, 2015,40(3):413-416.
[15] Li K F, Ouyang Y Z, Lu X P , et al. Application of precise point positioning for island control survey[J]. Geomatics and Information Science of Wuhan University, 2015,40(3):413-416.
[16] 崔剑凌 . 精密单点定位技术在困难地区重力调查中的应用[J]. 现代测绘, 2014,37(3):22-24.
[16] Cui J L . Application of precise point positioning technique in the investigation of the difficult areas of gravity[J]. Modern Surveying and Mapping, 2014,37(3):22-24.
[17] 陈俊勇, 杨元喜, 王敏 , 等. 2000国家大地控制网的构建和它的技术进步[J]. 测绘学报, 2007,36(1):1-7.
[17] Chen J Y, Yang Y X, Wang M , et al. Establishment of 2000 national geodetic control network of china and its technological process[J]. Acta Geodaetica et Cartographica Sinica, 2007,36(1):1-7.
[18] 魏子卿, 刘光明, 吴富梅 . 2000中国大地坐标系:中国大陆速度场[J]. 测绘学报, 2011,40(4):403-410.
[18] Wei Z Q, Liu G M, Wu F M . China geodetic coordinate system 2000: velocity field in mainland China[J]. Acta Geodaetica et Cartographica Sinica, 2011,40(4):403-410.
[19] 杜辉, 耿涛, 高鹏 , 等. 适用于青藏高原地区中大比例尺重力勘查的大地测量方法技术研究[J]. 地质与勘探, 2017,53(5):915-922.
[19] Du H, Geng T, Gao P , et al. Study on geodetic methods in gravity surveys of medium-large scales applicable to the Tibetan plateau[J]. Geology and Exploration, 2017,53(5):915-922.
[1] 徐玳笠, 唐宝山, 魏文博. 龙门山断裂带及其邻区电性结构特征[J]. 物探与化探, 2019, 43(1): 17-27.
[2] 杜辉, 耿涛, 刘生荣, 白运. 基于ArcGIS的地物化成果各坐标系统向CGCS2000坐标转换研究[J]. 物探与化探, 2018, 42(5): 1076-1080.
[3] 张富贵, 张舜尧, 唐瑞玲, 王惠艳, 杨志斌, 周亚龙, 孙忠军. 青藏高原湿地冻土区活动层甲烷排放特征[J]. 物探与化探, 2017, 41(6): 1027-1036.
[4] 徐建宇, 姜春香, 张保卫, 岳航羽. 浅层地震技术在陆域天然气水合物勘探中存在的问题及对策[J]. 物探与化探, 2017, 41(6): 1127-1132.
[5] 张舜尧, 张富贵, 杨志斌, 周亚龙, 王惠艳, 唐瑞玲, 孙忠军. 青藏高原天然气水合物勘探对湿地碳循环系统的影响[J]. 物探与化探, 2017, 41(6): 1044-1049.
[6] 任政委, 龙慧, 郭淑君, 刘文增. 青藏高原冻土地球物理勘查方法组合模式[J]. 物探与化探, 2017, 41(5): 856-861.
[7] 肖都, 李军峰. 一种用于航空物探测量的无人机路径规划方法[J]. 物探与化探, 2017, 41(3): 564-569.
[8] 高维, 舒晴, 屈进红, 米耀辉. 国外航空物探测量系统近年来若干进展[J]. 物探与化探, 2016, 40(6): 1116-1124.
[9] 孙栋华, 江民忠, 骆燕, 姜雪, 顾大钊. 尼日尔特吉达地区砂岩型铀矿综合信息找矿模型[J]. 物探与化探, 2015, 39(2): 273-282.
[10] 冯林刚. 基于MapGIS实现不同坐标系图件成果的相互转换[J]. 物探与化探, 2013, 37(5): 934-936.
[11] 许苏鹏, 姬泰脉, 纪福山, 张贵宾, 杨望. AS350-B3型直升机硬架航空磁测系统在青藏高原上的应用[J]. 物探与化探, 2013, 37(4): 640-644.
[12] 邱炜, 王富春, 罗先熔. 地电化学集成技术在青藏高原特殊景观区 的找矿效果及其异常与矿体产状的关系[J]. 物探与化探, 2013, 37(3): 377-381.
[13] 耿涛, 刘宽厚, 贺颢, 孟军海, 杨明生, 高鹏, 杜辉, 田中英. 青藏高原困难地区开展区域重力调查工作遇到的问题与对策[J]. 物探与化探, 2012, 36(5): 749-754.
[14] 杨亚斌, 韩革命. 区域重力调查中正常重力公式对比[J]. 物探与化探, 2012, 36(1): 45-47,53.
[15] 王通, 俞祁浩, 游艳辉, 王武, 杜二计. 物探技术在多年冻土探测方面的应用[J]. 物探与化探, 2011, 35(5): 639-642.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
京ICP备05055290号-3
版权所有 © 2021《物探与化探》编辑部
通讯地址:北京市学院路29号航遥中心 邮编:100083
电话:010-62060192;62060193 E-mail:whtbjb@sina.com